Omron G2RV-ST and G3RV-ST thin type I/O relays

Omron G2RV-ST and G3RV-ST Thin I/O relays are mounted at a high density and have an ultra-thin body with a width of 6.2mm to save application space. These user-friendly relays use Push-In Plus technology with low insertion forces that reduce connection time.

These relays are compatible with 14AWG/2.5mm2 wiring, and the larger hole and Angle structure improves wiring efficiency. Improved LED visibility and color stop block voltage line recognition for easy maintenance. The purpose of reducing the cutting force of the short strip is to improve the assembly process, and the isolation plate can prevent the short strip fracture layer from being energized.

G2RV-ST series adopts electromagnetic relay with transparent shell, which can easily check whether there is abnormal condition of contact by sight on site. The G3RV-ST series provides solid state relays with maximum applicable loads of 3A (DC) and 2A (AC). Omron G2RV-ST and G3RV-ST Thin I/O relays are suitable for DIN rail mounting.

Features

● Two series
-   High-density installation and ultra-thin body can save space
-   Push-In Plus technology, low insertion force, so user-friendly, connection time is reduced by 60%
-   With larger hole and Angle structure, the wiring efficiency is improved
-   14AWG/2.5mm2 compatibility Standardized cable connections are supported
-   Improved LED visibility and color stop block voltage line recognition for easy maintenance
-   Using terminal structure, not easy to bend, can easily replace the relay
-   Reduce the cutting force and improve the assembly process
-   The isolation plate prevents the short strip from being electrified
-   DIN guide tolerance is supported by elasticity

● G2RV-ST electromagnetic relay
-   Compared with G2R series, it can save 60% space and has a width of 6.2mm
-   Even with tight contact installation, 6A current (Max.) can be achieved
-   Gold plated contact suitable for microloads with failure rate P of 1mA (100mVDC)
-   The transparent shell can easily check whether the contact has abnormal state by visual inspection on site
-   Coil surge absorbing circuit, as standard
-   The inspection time can be shortened by operating the test switch

● G3RV-ST solid state relay
-   Compared with G3R-I/O series, it can save 60% space and has a width of 6.2mm
-   Maximum applicable load 3A (DC) and 2A (AC) due to the use of thin technology
-   The minimum applicable load for the output DC type is 100µA and the leakage current is 10µA or less
-   High speed switch type (operating time 0.2ms or less, release time 0.4ms or less)