RECOM has released two new series of 45W and 60W DIN rail power supplies

     RECOM has released two new series of 45W and 60W DIN rail power supplies: REDIN45 and REDIN60. In order to ensure its long service life, zero failure rate and high reliability, RECOM uses high-quality components, and the design has plenty of margin. This is also RECOM's design philosophy - portable installation, no maintenance.

     This series of Psus has a standard output voltage of 12VDC and 24VDC and can be adjusted by the front panel potentiometer. The REDIN series, with its superior linear adjustment rate and load adjustment rate, ensures a stable output voltage, which is displayed by the front panel "DC-OK" indicator. The series module also features a "DC-OK" non-voltage contact that can directly control the remote indicator light or send the signal to the monitoring center. And multiple modules can be connected in series to form a "system power normal" signal indication.

     This series of power supply modules has an operating temperature range of -20°C to +70°C, an efficiency of over 87%, and low standby power consumption (< 0.5W) minimizes energy consumption and heat generation. Most power failures are caused by input surges and voltage transients, so RECOM has designed an effective filtering circuit at the module input to ensure high performance and reliability of the power module. In addition, the power module of this series can still maintain a stable output of 50ms under the condition of input voltage jump and full load.

     But also has a perfect protection function, in addition to automatic restart of short circuit and overload protection, as well as over temperature and over voltage latch. The modules are UL certified and fully comply with IEC/EN/UL60950, CE and UL508 standards. Its input voltage ranges from 85VAC to 264VAC, and can operate at altitudes up to 5,000 m, so it can be widely used worldwide.

     The compact DIN rail power supply is only 88.6x41.1x101.4mm (LxWxH) in size and saves DIN rail space because the modules can be installed next to each other without any space between the modules. In addition to the rear mounting method, the PSU can also be mounted laterally in a chassis with a limited height.

     All REDIN power module families are designed for 24/7 continuous operation, and all modules are subject to burn-in testing under full load conditions and rigorous finished product inspection. Of course, the long service life of the module is also verified in the accelerated aging test. The REDIN series offers up to seven years of quality assurance - more than twice as long as most competitors and enough to show RECOM's confidence in the REDIN series.