Teledyne LeCroy's T3X3200P series offers a variety of display modes, including single or multi-channel set values, measured values and waveform displays

     Teledyne LeCroy Multi-channel programmable DC power supply T3X3200P series has a maximum power output of 217 W, including four models :T3PS13206P(0 to 32 V / 0 to 6 a) for single-channel output, and T3PS23203P for dual-channel output (CH1: 0-32 V / 0 to 3,CH2:0 32 V / 03 a), T3PS33203P three-channel output (CH1: 0-32 V / 0 to 3,CH2: 0-32 V / 0 to 3,CH3: 1.8V, 2.5V, 3.3V, 5.0V / 5 a), and a four-channel output (T3PS43203P CH1: 0-32 V / 0 to 3,CH2: 0-32 V / 0 to 3,CH3: 0 to 5 V / 0 to 1,CH4: 0-15 V over 0 to 1 A). This series not only provides high project resolution (1 mV / 0.1mA) and reading analysis (0.1mV / 0.1mA) but also features optimal low pulsation noise characteristics ≤350μV (RMS) /≤2 ma (RMS) and output transient recovery capability ≤50μS. Each channel provides a separate output switch.

     For CH1 and CH2 series-parallel applications, the tracking function of the T3X3200P series is to automatically switch the output to series-parallel using the internal circuit, without the need for additional external wiring, which not only provides convenience during operation, but also provides a more stable output. Other brands of tracking feature design require additional external wiring connections, outputs can be in series or parallel. However, excessively long, thin, or inconsistent external wiring can result in inaccurate voltage or current output.

     The T3X3200P series offers a variety of display modes, including single or multi-channel set values, measured values and waveform displays. The monitoring function of the T3X3200P series allows the user to set monitoring conditions as required, and there is a sound alarm or stop output during measurement, stopping measurement and protecting the user's DUT.

     The T3X3200P series provides the output recording function to record the voltage/current output in process memory. The results can be stored in (*.rec) or (*.csv) files, which can then be transferred to a USB flash drive and exported to a computer for future PC software or Excel analysis. The T3X3200P series CH1/CH2 has load function. A single power supply can be set with one channel as the power output and one channel as the load function to consume the power of the DUT and meet the requirements of the battery basic charge and discharge test. Channels 1 and 2 not only provide 32 V/3 A power output, but also have built-in features for A maximum 32 V constant voltage (CV) load, a maximum 3.2 A constant current (CC) load, and a maximum 1k Ohm constant resistance (CR) load.

     The T3X3200P series provides sequential output capabilities for channels 1 and 2. This feature not only allows the user to edit the power output waveform, but also allows the user to set the sequential CV or CC load waveform, i.e. serial power output or dynamic load simulation test. To simplify waveform editing Settings, the T3X3200P series has eight template waveforms built into the sequential output function for users to directly apply the output, including sine, pulse, Ramp, Stair Up, Stair Dn, Stair UpDn, Exp Rise and Exp Fall waveforms.

     The internal protection function includes OVP/OCP/OPP/OTP. The protection mechanism of OVP/OCP/OTP is realized by hardware circuit, which has the advantage of faster response time compared with the competitors that adopt software to realize protection. The OVP/OCP feature allows the user to set protection action points (except CH3 for T3PS33203P) according to the DUT condition. OPP is activated only during load function operations. Delay Set the time when the power output in channel 1 or channel 2 is switched on or off. In addition, the trigger In/ trigger Out function synchronizes external devices. T3PS33203P Channel 3 adds a 3 a USB (Type a) output terminal for USB charging tests.

     Intelligent temperature control fan can adjust the speed according to the temperature of the power transistor to reduce unnecessary noise. Output value Settings and sequence/delay/recorder features provide ten sets of internal memory for use and can be loaded/stored using USB flash drives. In addition to the standard RS-232 and USB remote interfaces, the T3X3200P series also features LAN interfaces to facilitate different needs. The T3X3200P series commands meet the SCPI requirements.