The monolithic architecture using M0T5 VIPower technology uses QFN48L packaging

     STMicroelectronics IPS1025HFQ is a monolithic architecture using M0T5 VIPower technology and QFN48L (8 mm x 6 mm) package. These ics are single high-voltage side switching devices that can drive capacitive, resistive, or inductive loads on one side of the ground (high-voltage side switches). The recommended operating voltage is in the range of 8.65V to 60V, but the breakdown voltage on the power supply pin can reach 65V.

     The output stage is an n-channel PowerMOSFET with A typical RDS(ON) of 12 mΩ at ambient temperature and an internal limit of 2.5 A minimum output current. The IC is capable of setting two different current limiting levels (ILIMH-X and ILIML-X) for smart drive loads such as light bulbs and capacitive loads with initial peak current requirements.

     With embedded protection, with two pairs of current limiting thresholds and levels (IPKH, ILIMH, IPKL, ILIML per DPK time), but also with integrated diagnostic function, can be realized with load (with initial peak current requirements) powerful machine.

     The IPS1025HFQ has a power on/off delay of less than 60 μs and is suitable for interface Type C (or D) Class 3 SIL (Safety Integrity Level) applications. The STEVAL-IFP040V1 industrial digital output expansion board for STM32 Nucleo provides a powerful and flexible environment for evaluating the drive and diagnostic capabilities of IPS1025HFQ (Single high voltage side Intelligent Power solid-state Relay), IPS1025HFQ is in a digital module connected to a 2.5A (maximum) industrial load.

     IPS1025HFQ is a single chip, single device, can drive one side of the ground capacitive, resistive or inductive load; The IC is specifically designed to drive heavy loads with very low power consumption in PLC modules or to drive one-way motors in vending machine applications.