Records 5,523
Page 138/461

Texas Instruments comparator has rail-to-rail input, push-pull output, and shutdown functions
2022-12
Semiconductors
Texas Instruments
[Dec 27 2022] The Texas Instruments TLV1805 High voltage comparator offers a unique combination of a wide range of supplies, push-pull outputs, rail-to-rail inputs, low static current, shutdown capability, and fast output response. The TLV1805 is packaged in a 6-pin SOT-23 package for the extended industrial temperature range from -40°C to +125°C. These features make this suitable for applications requiring po ...

Texas Instruments offers its ISO7740 high-speed, low-power, powerful EMC, four-channel digital isolator
2022-12
Semiconductors
Texas Instruments
[Dec 27 2022] Texas Instruments' ISO774x equipment is a high-performance four channel digital isolator, with 5000 V (RMS) (DW package) and 2500 V (RMS) (DBQ package) isolation levels, complying with UL 1577. According to VDE, CSA, TUV and CQC standards, this series of equipment has a higher insulation level. The ISO774x device provides high electromagnetic immunity and low emissions under low power consumption ...

Sensirion's siloxane resistant SGP30 metal oxide gas sensor for indoor air quality applications
2022-12
Semiconductors
Sensirion AG
[Dec 27 2022] Senrion's SGP30 is a digital multi pixel gas sensor designed to be easily integrated into air purifiers, demand controlled ventilation and Internet of Things applications. Based on a multi pixel platform, the SGP30 integrates four gas sensing elements into a very small 2.45 x 2.45 x 0.9 mm DFN package with a fully calibrated air quality output signal. As a long-term stable metal oxide gas sensor, ...

Maxim provides a health sensor platform designed to test and evaluate innovative medical and high-end fitness solutions
2022-12
Power
Maxim Integrated
[Dec 27 2022] MAXREFDES100# is Maxim's hSensor platform that helps customers test and evaluate innovative medical and high-end fitness solutions faster and easier. Fitness and clinical applications that can be evaluated using the platform include heart rate (HR) and electrocardiogram (ECG) based on chestapplications, optical HR for smartwatches and headphones, arrhythmia detection and O(2) measurements. The MA ...

Microchip's five-core Linux supports a low-cost development platform for RISC-V microprocessors
2022-12
Semiconductors
Microchip Technology
[Dec 27 2022] Microchip Technology's MPFS-ICICLE-KIT-ES PolarFire SoC Icicle kit is a low-cost development platform, Ability to evaluate five-core Linux kernel RISC-V microprocessor subsystem, innovative Linux, real-time execution, and low power capabilities. This kit has a rich set of Northern Lights SoC FPGA peripherals. The Northern Lights SoC is ideally suited for safe, reliable and energy efficient comput ...

Digital key Custom programmable oscillator SiTime
2022-12
Power
SiTIME
[Dec 27 2022] SiTime's universal low power oscillator is custom-programmable with a digital key. Production quantities are available for purchase within 48 hours. The custom programming capability shortens the engineer's design cycle, allowing it to get to market faster. These oscillators offer a perfect combination of low power consumption, excellent stability, small size, and fast startup. Also available is ...

The compact and independent Bluetooth low-power wireless MCU module of u-blox complies with the Bluetooth 5.1 specification
2022-12
Optoelectronics
UDOO
[Dec 26 2022] U-blox's NINA-B40 module is built on Nordic nRF52833 chips and as an open CPU, client applications run on the built-in Arm Cordex-M4 and FPU. The NINA-B40 module integrates flash memory and RAM, and the application runs on an embedded Bluetooth low-power stack. Bluetooth low energy services such as serial communication, GATT, beacons and mesh are supported. For location applications, NINA-B40 sup ...

Ti offers an OPA320 and OPA2320 precision, 20 MHz, 0.9 pA, low noise, RRIO, CMOS operating amplifier, and shutdown
2022-12
Semiconductors
Texas Instruments
[Dec 26 2022] Texas Instruments OPA320 (single) and OPA2320 (dual) are precision low-voltage CMOS operational amplifiers, which optimize very low noise and broadband, and operate at a low static current of only 1.45 mA. The OPA320 series is ideal for low power, single power applications. Low noise (7 nV/√ Hz) and high-speed operation also make them very suitable for driving sampling analog-to-digital converter ...

Microchip's ATWINC3400 is ideal for adding a wireless connection
2022-12
Semiconductors
Microchip Technology
[Dec 26 2022] Microchip Technology's ATWINC3400 is an IEEE 802.11b /g/n and BLE4.0 Internet of Things (IoT) network controller SoC. It is an ideal addition to existing microcontroller (MCU) solutions to add Wi-Fi and Bluetooth low power (BLE) networking capabilities. The module communicates via a UART or SPI-to-Wi-Fi interface. ATWINC3400 connects to any microchip PIC or SAM MCU with minimal resource requireme ...

CML Microcircuits' CMX7158 scrambler IC blocks digital eavesdropping
2022-12
Optoelectronics
CML Microcircuits
[Dec 25 2022] The CMX7158 from CML Microcircuits is a low-power, full-duplex, inverter voice scrambler chip. This type of encryption is suitable for many personal, enterprise, and commercial applications to block eavesdropping from fellow users or RF scanners. With a flexible analog interface that allows CMX7158 to be plugged into existing speech paths, the device is suitable for use in new designs, integrated ...

Maxim introduced the MAX32625 and MAX32626 ultra-low power, high performance ARM Cortex-M4F wearable microcontrollers
2022-12
Semiconductors
Maxim Integrated
[Dec 25 2022] Maxim Integrated's MAX32625IWY+ and MAX32626IWY+ are ARM Cortex-M4, FPU-based microcontrollers ideal for emerging wearable medical and fitness applications. The architecture combines ultra-low power consumption, efficient signal processing capabilities, and ease of use. A built-in 96MHz oscillator provides high performance capabilities and a built-in 4MHz oscillator supports the lowest power cons ...

TDK-Lambda's Class I and II configurable medical and ITE power supplies require low airflow and conform to curve B for electromagnetic interference
2022-12
Semiconductors
TDK-Lambda
[Dec 25 2022] TDK Lambda's XMS500 series AC-DC power supply has a rated output power of 500w and is classified into Class I and Class II (ungrounded) structures. The series conforms to curve B and radiation emission carries a margin of 6 dB and a low leakage current of less than 150 μs. High operating efficiency and mechanical design enable the XMS500 to operate at full load at a airflow speed of only 1m /s, r ...